Tervetuloa Standard Systems, Jos sinulla on kysyttävää, soita numeroon +358 XX XXX XXXX

Electro-Voice  |  SKU: EVA-1151D-PIB

EVA-1151D-PIB


EV Single DVX3159, EVCOAT, PI-weatherized, black


• Compact design rigs with EVA full-range modules

• Hidden suspension hardware (included) isaesthetically pleasing

• Three finishes available — standard, PI, andfiberglass

• 98 dB sensitivity

• 500 W continuous power capacity (2,000 W peak)

• 125/131 dB maximum SPL (continuous/peak)

• EVADA (EVA Design Assistant) software toolavailable


The Electro-Voice EVA-1151D is a high-power, front-loaded subwoofer module for use with EVA full-range line-array modules. It

can be arrayed on top of an EVA full-range array using an EVASG2 standard or EVA-EG2 extended grid, or behind a full-range

EVA array using the EVA-CG coupler grid, which allows subs to

be flown in the array without increasing trim height. Up to three

EVA-1151D subwoofer modules and five full-range modules may

be flown in this configuration from a single hang point. The unique

acoustic and integrated rigging design of the EVA series also allows for construction of vertical arrays up to eight modules high

using any combination of EVA-1151D and/or EVA-2082S modules.

For rigging information please refer to the EVA User Manual available at www.electrovoice.com.

The EVA-1151D has been designed exclusively for fixed installation applications. The DVX3159A 15” woofer is specially designed

for subwoofer duty to provide reliable low-frequency performance

with solid impact and low distortion at high sound pressure levels.

The enclosure is constructed of 18-mm 13-ply birch plywood reinforced with internal steel rigging top to bottom and coated with

EVCoatTM for durability and professional appearance. PI versions

are available for indirect outdoor exposure or fiberglass (FG)

versions for severe exposure applications. PI and FG versions

include the CDG dual-gland-nut input panel cover and stainless

steel three-layer grille. The innovative input panel provides a

choice of Phoenix/Euroblock connectors, optional CDNL4 cover

plate with dual NL4-type connectors or the CSG single-gland-nut

plate for use with cable. Enclosure side-panel covers conceal all

suspension hardware and provide a smooth, monolithic appearance. In keeping with the modular building-block philosophy

behind EVA series loudspeakers, intermodule tie plates included

with the EVA-1151D provide for splays of 0° or 5° between

subwoofer modules to help accommodate the wide variety of

array configurations possible, including stand-alone subwoofer

arrays. For array design please refer to the EVA Design Assistant

(EVADA) software available at www.electrovoice.com.
schema
Electro-Voice

EVA-1151D-PIB

€0,00 EUR
EV Single DVX3159, EVCOAT, PI-weatherized, black


• Compact design rigs with EVA full-range modules

• Hidden suspension hardware (included) isaesthetically pleasing

• Three finishes available — standard, PI, andfiberglass

• 98 dB sensitivity

• 500 W continuous power capacity (2,000 W peak)

• 125/131 dB maximum SPL (continuous/peak)

• EVADA (EVA Design Assistant) software toolavailable


The Electro-Voice EVA-1151D is a high-power, front-loaded subwoofer module for use with EVA full-range line-array modules. It

can be arrayed on top of an EVA full-range array using an EVASG2 standard or EVA-EG2 extended grid, or behind a full-range

EVA array using the EVA-CG coupler grid, which allows subs to

be flown in the array without increasing trim height. Up to three

EVA-1151D subwoofer modules and five full-range modules may

be flown in this configuration from a single hang point. The unique

acoustic and integrated rigging design of the EVA series also allows for construction of vertical arrays up to eight modules high

using any combination of EVA-1151D and/or EVA-2082S modules.

For rigging information please refer to the EVA User Manual available at www.electrovoice.com.

The EVA-1151D has been designed exclusively for fixed installation applications. The DVX3159A 15” woofer is specially designed

for subwoofer duty to provide reliable low-frequency performance

with solid impact and low distortion at high sound pressure levels.

The enclosure is constructed of 18-mm 13-ply birch plywood reinforced with internal steel rigging top to bottom and coated with

EVCoatTM for durability and professional appearance. PI versions

are available for indirect outdoor exposure or fiberglass (FG)

versions for severe exposure applications. PI and FG versions

include the CDG dual-gland-nut input panel cover and stainless

steel three-layer grille. The innovative input panel provides a

choice of Phoenix/Euroblock connectors, optional CDNL4 cover

plate with dual NL4-type connectors or the CSG single-gland-nut

plate for use with cable. Enclosure side-panel covers conceal all

suspension hardware and provide a smooth, monolithic appearance. In keeping with the modular building-block philosophy

behind EVA series loudspeakers, intermodule tie plates included

with the EVA-1151D provide for splays of 0° or 5° between

subwoofer modules to help accommodate the wide variety of

array configurations possible, including stand-alone subwoofer

arrays. For array design please refer to the EVA Design Assistant

(EVADA) software available at www.electrovoice.com.
Katso tuote