EVIDFM4.2

EV 4" 2-vägs infälld högtalare, 30W, 8Ω, 100V, vit, par

EVID FM4.2

4" 2‑way flush‑mount loudspeaker

• Shallow profile, ideal for tight wall or ceiling spaces

• Tuned passive radiator extends bass, enhances performance

• High quality 1-inch titanium dome tweeter

• Full-bandwidth overload protection

• 70 V, 100 V, and 8 ohms operation in the same model for off-the-shelf versatility

• Front-panel mode/wattage switch

• Fully-sealed enclosure provides superior isolation to protect adjacent rooms

• Secure Phoenix-style pass-through connectors for easy wiring and installation.

• Four point “quick mounting” tabs for fast attachment in any wall cavity

• Can-mounted transformer for enhanced rigidity

• Ribbed back can eliminates flexing

The EVID FM4.2 flush-mounted loudspeaker system from Electro-Voice is a complete two-way in-wall loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 4 inch two-way loudspeaker coupled with a 4 inch passive radiator and an internal line-matching transformer. The loudspeaker features 4 inch low-frequency cone and high-temperature voice-coil assembly along with a 4 inch long excursion passive radiator and titanium coated dome tweeter. The EVID FM4.2 loudspeaker utilizes a crossover network, centered at 3,600 Hz, that provides 16-dB-per-octave tweeter protection outside of its operating range. In addition the EVID FM4.2 features a comprehensive protection circuit to shield the woofer and tweeter drivers from excessive power levels.

The EVID FM4.2 utilizes a transformer that offers a selection of 1.75, 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines. The wattage is selected via a convenient switch on the front baffle. The unit can also be operated as an 8-ohm speaker via the same front panel selector switch.

The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel is constructed from heat resistant ABS. The rear enclosure is constructed from zinc-plated, steel. The rear enclosure provides an optimum internal volume, ensuring extended low-frequency performance. It is constructed from heavy-gauge, rugged steel. The steel rear enclosure was optimized using FEA to virtually eliminate panel resonance. The entire enclosure is less than 4 inch deep providing an easy installation into nearly any tight wall or ceiling space. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker and provides pass through to additional speakers. FM4.2 loudspeakers provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.