Tervetuloa Standard Systems, Jos sinulla on kysyttävää, soita numeroon +358 XX XXX XXXX

Dynacord  |  SKU: PMX-2P500

PMX-2P500


DYNACORD Förstärkare 2x500 W, 50 Hz-25 kHz, klass-D teknologi

▪ 2 ✕ 500-Watt class D amplifier

▪ Low power consumption in standby mode (3 Watt)

▪ Local input per channel

▪ Excellent sound quality > 104 dB s/n ratio

The PMX-2P500 class-D amplifier is a 2 ✕ 500 W professional audio amplifier for evacuation purposes. It can be operated from

both the mains and a DC supply. The output voltage is galvanically insulated and is constantly monitored for ground fault. An

energy-saving mode and temperature-controlled fans reduce

energy consumption and noise levels. The control and monitoring functions are performed via CAN bus. This amplifier is

designed for operation in an emergency

evacuation system. The amplifiers are usually controlled via a controller and configured using IRIS-Net.

The power amplifier has the following features:

• Floating 100 V or 70 V power outputs

• High efficient amplifier blocks in class-D technology

• Outputs idling and short circuit-protected

• Mains operation 120–240 V (50/60 Hz) and/or 24 V

DC emergency backup

• Electronically balanced inputs

• Temperature monitoring function

• Pilot tone and ground fault monitoring function via PMX-4CR12 controller or PMX-4R24 router

• Processor control of all functions

• Monitoring of the processor system via watchdog circuit

• Non-volatile FLASH memory for configuration data

• Internal monitoring function

• Integrated audio relays

• Line monitoring function

The power amplifier is processor-controlled and equipped with extensive monitoring functions. Line monitoring for the CAN bus

and for audio transmission

allows line interruptions and short-circuits to be detected and indicated to the user.
schema
Dynacord

PMX-2P500

€0,00 EUR
DYNACORD Förstärkare 2x500 W, 50 Hz-25 kHz, klass-D teknologi

▪ 2 ✕ 500-Watt class D amplifier

▪ Low power consumption in standby mode (3 Watt)

▪ Local input per channel

▪ Excellent sound quality > 104 dB s/n ratio

The PMX-2P500 class-D amplifier is a 2 ✕ 500 W professional audio amplifier for evacuation purposes. It can be operated from

both the mains and a DC supply. The output voltage is galvanically insulated and is constantly monitored for ground fault. An

energy-saving mode and temperature-controlled fans reduce

energy consumption and noise levels. The control and monitoring functions are performed via CAN bus. This amplifier is

designed for operation in an emergency

evacuation system. The amplifiers are usually controlled via a controller and configured using IRIS-Net.

The power amplifier has the following features:

• Floating 100 V or 70 V power outputs

• High efficient amplifier blocks in class-D technology

• Outputs idling and short circuit-protected

• Mains operation 120–240 V (50/60 Hz) and/or 24 V

DC emergency backup

• Electronically balanced inputs

• Temperature monitoring function

• Pilot tone and ground fault monitoring function via PMX-4CR12 controller or PMX-4R24 router

• Processor control of all functions

• Monitoring of the processor system via watchdog circuit

• Non-volatile FLASH memory for configuration data

• Internal monitoring function

• Integrated audio relays

• Line monitoring function

The power amplifier is processor-controlled and equipped with extensive monitoring functions. Line monitoring for the CAN bus

and for audio transmission

allows line interruptions and short-circuits to be detected and indicated to the user.
Katso tuote